12 Companies Leading The Way In Dodge Ram 1500 Aftermarket Upgrades
Breathe Better, Drive Harder: The Ultimate Guide to Dodge Ram 1500 Air Intake Upgrades
The Dodge Ram 1500 has long been a titan in the full-size pickup market, understood for its rugged styling, impressive towing capability, and the famous rumble of its Hemi V8 or the effectiveness of its EcoDiesel engines. Nevertheless, like a lot of mass-produced cars, the Ram 1500 goes through manufacturing compromises. Among the most substantial traffic jams in its performance profile is the factory air intake system.
Engineered mostly for sound reduction and cost-efficiency instead of optimum airflow, the stock intake can stifle an engine's potential. Upgrading to an aftermarket air intake is frequently the first modification truck enthusiasts perform. This guide checks out the mechanics, advantages, and factors to consider of upgrading the air intake system on a Dodge Ram 1500.
- * *
The Science Behind the Upgrade
To comprehend why an upgrade is essential, one need to comprehend how an internal combustion engine functions. An engine is essentially a large air pump. It draws in air, blends it with fuel, sparks it to develop power, and presses out exhaust. The more efficiently an engine can “breathe,” the more power it can produce.
The Problem with Factory Intakes
Factory intake systems typically utilize narrow, corrugated plastic tubes and restrictive filter boxes developed to keep the engine quiet (cabin NVH— Noise, Vibration, and Harshness). These style choices create turbulence and restrict the volume of air reaching the manifold. In addition, factory systems frequently pull air from the warm engine bay rather than the cooler air outside the automobile.
The Aftermarket Solution
Aftermarket cold air consumption (CAI) solve these problems by:
- Straightening the Airflow: Using mandrel-bent tubes (aluminum or high-density polyethylene) to minimize turbulence.
- Increasing Surface Area: Utilizing high-flow conical filters that use more surface location than flat paper filters.
- Minimizing Air Temperature: Relocating the air inlet or utilizing a sealed heat guard to guarantee just dense, oxygen-rich cold air gets in the combustion chamber.
- * *
Secret Benefits of an Air Intake Upgrade
When a Dodge Ram 1500 is geared up with a high-performance intake, numerous key improvements are instantly obvious.
1. Increased Horsepower and Torque
Lowering the air temperature increases oxygen density. More oxygen permits the lorry's Engine Control Unit (ECU) to add more fuel, leading to a more effective explosion throughout the combustion stroke. Ram 1500 owners generally see gains ranging from 8 to 20 horsepower, depending upon the engine and particular intake model.
2. Improved Throttle Response
Because the engine does not need to work as difficult to “gulp” air through a limiting straw, the delay in between pressing the gas pedal and the truck accelerating is substantially reduced. This makes the truck feel much lighter and more responsive in city driving.
3. Improved Engine Sound
For many lovers, the noise is the primary motivator. An aftermarket intake eliminates the baffling of the factory system, permitting the aggressive grumble of the 5.7 L Hemi to be heard plainly throughout acceleration, while staying peaceful at travelling speeds.
4. Better Fuel Economy
While it may seem counterproductive that more air/fuel leads to much better MPG, the increased efficiency indicates the engine needs less effort to maintain highway speeds. When driven conservatively, lots of Ram owners report a boost of 1— 2 MPG.
- * *
Contrast Table: Top Air Intake Brands for Ram 1500
Brand
Filter Type
Housing Style
Best For ...
S&B Filters
Oiled or Dry
Completely Enclosed Box
Off-roaders & & dirty environments
K&N Performance
Oiled (Cotton)
Heat Shield/ Open
Maximum noise and air flow
aFe Power
Oiled or Dry
Stage 2 (Enclosed)
High-end performance & & streamlined appearance
Mopar (OEM+)
Oiled
Open Top
Maintaining factory aesthetic/warranty
Rough Country
Dry
Heat Shield
Budget-friendly lovers
- * *
Dry vs. Oiled Filters: The Great Debate
When choosing an upgrade, truck owners need to pick in between 2 main filter media. Both have advantages, however the choice frequently depends upon the environment in which the truck is driven.
Oiled Filters
- Pros: Can be cleaned and re-oiled forever; normally provide the greatest air flow rates.
- Cons: Over-oiling can result in sensing units being covered in oil; requires a “dry time” during upkeep.
Dry Filters
- Pros: Easier to tidy (often just vacuuming or light cleaning); no risk of harmful Mass Air Flow (MAF) sensors.
Cons: May require to be replaced earlier than oiled filters; a little less air flow than premium oiled variations.
- *
Performance Expectations by Engine Type
The Dodge Ram 1500 has various engine setups. The impact of an air intake upgrade differs depending on what is under the hood.
Engine
Estimated HP Gain
Approximated Torque Gain
Sound Profile Change
3.6 L Pentastar V6
5— 10 HP
8— 12 lb-ft
Moderate Growl
5.7 L Hemi V8
12— 18 HP
15— 22 lb-ft
Aggressive/Deep Tone
3.0 L EcoDiesel
8— 12 HP
15— 20 lb-ft
Improved Turbo Spool
6.2 L Supercharged (TRX)
25— 40 HP
30+ lb-ft
High-Pitch Supercharger Whine
- * *
Installation Considerations
Updating an air intake is widely thought about one of the simplest “bolt-on” modifications. The majority of systems can be installed in a driveway utilizing basic hand tools.
Needed Tools:
- Ratchet set (10mm and 8mm sockets are basic)
- Flat-head screwdriver or nut motorist for tube clamps
- Cut elimination tool (for particular sensor clips)
- Allen wrenches (usually included in the package)
The Installation Process
- Detach the Battery: Always the initial step when handling engine sensors.
- Get Rid Of the Stock Unit: Loosen the clamps at the throttle body and remove the bolts holding the stock air box.
- Transfer the Sensor: Carefully eliminate the Intake Air Temperature (IAT) sensor or MAF sensing unit from the old tube and install it into the brand-new one.
- Put Together the New Kit: Install the new housing/heat shield and the intake tube.
- Protect the Filter: Attach the high-flow filter to the end of television.
- Tighten All Connections: Ensure there are no air leaks, as unmetered air can cause the engine to run lean.
- * *
Picking the Right System: Key Features To Look For
When shopping for a Dodge Ram 1500 air intake, search for these specific functions to ensure long-term complete satisfaction:
- Mandrel-Bent Tubing: This ensures the tube keeps a constant diameter even throughout curves, preventing air “clumping.”
- Heat Shielding: A system that is open to the engine bay without a shield is technically a “brief ram” intake and might really harm efficiency by absorbing hot air.
- CARB Compliance: For owners in states like California, ensure the intake has an Executive Order (EO) number to pass emissions testing.
Serviceability: Check how easy it is to access the filter for cleansing. Some enclosed boxes need removing several screws to reach the filter.
- *
Updating the air intake on a Dodge Ram 1500 is an affordable method to unlock hidden capacity. By changing a limiting, muffled factory system with a high-flow aftermarket solution, owners can take pleasure in better horsepower, better throttle reaction, and a more commanding engine note. Whether the goal is to improve hauling effectiveness on a 5.7 L Hemi or to hear the turbo spool on an EcoDiesel, an air intake upgrade remains a fundamental adjustment for any Ram owner.
- * *
Often Asked Questions (FAQ)
1. Will an air intake upgrade space my Dodge Ram service warranty?
Under the Magnuson-Moss Warranty Act, a manufacturer can not void your warranty simply due to the fact that an aftermarket part is installed. Nevertheless, if the aftermarket part specifically triggers a failure (e.g., an oiled filter ruins a sensing unit), that specific repair work might not be covered.
2. Do I need to “tune” my truck after setting up an intake?
For many modern Ram 1500s, the ECU can recalibrate itself to the increased air flow within 50— 100 miles of driving. While a customized tune can assist maximize the gains, it is not required for a standard cold air intake.
3. How frequently should Dodge Ram Performance Parts clean the aftermarket filter?
This depends on driving conditions. For city and highway driving, a lot of producers advise examining the filter every 25,000 to 50,000 miles. For off-road or dirty environments, it must be inspected every 5,000 to 10,000 miles.
4. Is a plastic intake tube better than a metal one?
Plastic (specifically HDPE) is generally better at resisting “heat soak.” Metal tubes can end up being hot to the touch, which may a little warm the air travelling through them, though the difference is frequently minimal at highway speeds.
5. Can I install this myself?
Yes. It is a beginner-level project that typically takes between 45 and 90 minutes. Easy guidelines are included with a lot of sets from trusted brands like S&B or K&N.
